Agricultural Engineering Set 53

Other topics

Learning Mode Previous Next
On This Page

This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 53

Q1 | In power driven iron ghani, the percentage oil loss (left in cake) is
Q2 | Rotary tillers art used for
Q3 | The pump is mostly made of
Q4 | In water-cooled engines, water pump is connected with
Q5 | For LSU dryer, the recommended airflow rate is
Q6 | An instrument used to measure wind speed is
Q7 | Lubrication oils are rated by
Q8 | In three cylinder in-line engine the power impulse occurs after every
Q9 | The KVIC biogas is
Q10 | In Cl engine of tractor injection pressure is in range of
Q11 | Arch median screw is
Q12 | The suitable clearance between reel and cutter bar for all purposes is
Q13 | Relative movement of the wheel in direction of travel for given distance under load and no load condition is
Q14 | When a well is dug in water table aquifer the static water level in the well stands at
Q15 | The capacity of bucket elevator varies as
Q16 | Which of the method, the separation of bran without loss of endosperm is possible?
Q17 | The mould board used on tractor plough for general farm use is
Q18 | A 3.6 to 4.5 kg dust is enough for dusting of
Q19 | A harrow, which is based on a principle that side thrust of rear gang
Q20 | The main function of crown wheel is
Q21 | Of the following, blower is part of
Q22 | A moisture content of threshed paddy which is sun dried on floor is upto
Q23 | Bar is the unit of
Q24 | Lubrication system of tractor engine develops pressure of about
Q25 | The single cylinder engine is generally used in
Previous Next