Agricultural Engineering Set 23

On This Page

This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 23

Q1 | The application of Darcy's Law is limited by the condition that flow through the porous medium must be
  • Laminar
  • Turbulent
  • Intermediate
  • None of these
Q2 | A gang mower is a group of
  • Two cylincrical mower
  • Three cylindrical mower
  • Four cylindrical mower
  • None of these
Q3 | The furrow opener used for planting cotton seeds in areas where the uncertainty of favourable weather for germination is
  • Variable depth furrow opener
  • Constant depth furrow opener
  • Disc type furrow opener
  • Stub runner type furrow opener
Q4 | The expected life and useful hours of cultivator is
  • 8 years, 2400 hours
  • 12 years, 3000 hours
  • 16 years, 3500 hours
  • 20 years, 3800 hours
Q5 | The main objective of tillage is
  • Loosing soil
  • Breaking compact earth surface
  • Improve aeration of soil
  • All are correct
Q6 | A tractor-drawn harrow mostly has
  • Rigid tynes
  • Flexible tynes
  • Both rigid and flexible tynes
  • None of these
Q7 | The camshaft in an engine is always mounted
  • Perpendicular to the crankshaft
  • Inclined to the crankshaft
  • Parallel to the crankshaft
  • Inline to crank shaft
Q8 | The device used to sow seeds, which are larger in size and cannot be sown by usual seed drill is
  • Planter
  • Transplated
  • Seed drill
  • All are correct
Q9 | Amount of liquid that a man can spray in a day is
  • 60 litres liquid
  • 70 litres liquid
  • 80 litres liquid
  • 90 litres liquid
Q10 | The power of engine transmitted to rear wheel of tractor is connected and disconnected by
  • Flywheel
  • Clutch
  • Gear
  • None of these
Q11 | In six cylinder in-line engine, the power impulse occurs after every
  • 720 of crankshaft rotation
  • 360 of crankshaft rotation
  • 240 of crankshaft rotation
  • 120 of crankshaft rotation
Q12 | The threshing efficiency of thresher depends on
  • Cylinder peripheral speed
  • Cylinder concave clearance
  • Feed rate, moisture content and type of crop
  • All are correct
Q13 | Angle between centre line of kingpin of trctor and vertical line is called
  • Tilt angle
  • Camber angle
  • Caster angle
  • All are correct
Q14 | The horizontal component of pull perpendicular to the direction of travel is
  • Draft
  • Unit draft
  • Side draft
  • None of these
Q15 | R' pocket type disc separators are used for separation of
  • Broken rice from whole rice
  • Stones from grain
  • Mustard from wheat
  • Cowpeas from rice
Q16 | Planters are used for sowing
  • Small seeds
  • Bolder seeds
  • Seedlings
  • Plants
Q17 | Insecticide capsule are used at
  • 2.5 cm below the soil surface
  • About 2.5 cm from each hill
  • From 3 to 5 days after transplanting
  • All are correct
Q18 | An instrument used for measuring the solar radiation is
  • Thermometer
  • Pyrheliometer
  • Thermocouple
  • All are correct
Q19 | In disc harrow, a device used to provide a distance between two discs mounted on same gang axle is
  • Scraper
  • Gang
  • Spool
  • Arbor bolt
Q20 | In drizzle the size of droplet is
  • Less than 0.5 mm
  • More than 0.5 mm
  • Equal to 0.5 mm
  • None of these
Q21 | The pressure of radiator cap is about
  • 0.3 to 0.4 kg/cm2
  • 0.4 to 0.5 kg/cm2
  • 0.4 to 0.6 kg/cm2
  • 0.4 to 1.0 kg/cm2
Q22 | A pounding method of rice milling requires
  • Mechanical power
  • Electrical power
  • Human power
  • All are correct
Q23 | In comparison to raw rice bran, parboiled rice bran contains
  • Less starch and more oil
  • More starch and less oil
  • More starch and more oil
  • Less starch and less oil
Q24 | The MB plough works on the principle of
  • Friction
  • Rolling
  • Suction
  • Scouring
Q25 | Crop management system reduces the
  • Detachment of soil particles
  • Transport of soil particles
  • Both (a) & (b)
  • None of these