On This Page
This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 55
Q1 | A windmill suitable for water lifting is
- Single blade type
- Double blade type
- Triple blade type
- Multiple blade type
Q2 | The firing order of 4 strokes 6 cylinder engine is
- 1-5-3-6-2-4
- 1-3-4-2-6-5
- 1-3-2-5-4-6
- 1-3-5-6-4-2
Q3 | The specific fuel consumption of petrol engine is
- 180 gm/bhp/hr
- 200 gm/bhp/hr
- 150 gm/bhp/hr
- 290 gm/bhp/hr
Q4 | Distillation test measures the
- Calorific value
- SAE number
- Voltility
- Power
Q5 | Mass curve of a rainfall of a storm is plotted between
- Accumulated precipitation and time in chronological order
- Accumulated rainfall intensity and time
- Rainfall intensity and time in chronological order
- None of these
Q6 | At proper alignment of mower the cutter bar is set at
- 20? inward
- 5? inward
- 10? inward
- 15? inward
Q7 | Ultra low volume sprayer is used for application of
- Insecticides
- Pesticides
- Weedicides
- All are correct
Q8 | The average threshing of capacity bullock-drawn Olpad thresher per day is
- 150 kg
- 353 kg
- 562 kg
- 600 kg
Q9 | Final drive is a
- Speed increasing unit
- Speed reduction unit
- Torque increasing unit
- Torque reduction unit
Q10 | The pH value of sturry for better gas production should be between
- 3?5
- 5?6
- 7?8
- 8?9
Q11 | A multi-crop thresher is used for threshing
- Wheat
- Paddy
- Soyabean
- All are correct
Q12 | The cutter bar of conventional combine is operated at
- 350-800 strokes/min
- 500-800 strokes/min
- 800-900 strokes/min
- 800-1200 strokes/min
Q13 | The weight of diesel engine per horsepower is
- Lighter than petrol engine
- Equal to petrol engine
- Heavier than petrol engine
- None of these
Q14 | The percentage of protein by weight in pulse is
- 15-20%
- 17-5%
- 18-27%
- 20-30%
Q15 | Solid injection system is also known as
- Airless mechanical injection
- Air injection
- Jerk pump system
- All are correct
Q16 | The gap of spark plug generally should be
- 0.1 mm
- 0.3 mm
- 0.5 mm
- 0.6 mm
Q17 | Universal Soil Loss Equation (USLE) is named because
- Its validity is more:
- It accounts all parameters affecting the soil loss
- It is universally adopted
- All are correct
Q18 | In rotary type power duster, the speed of blower is
- 1000 rpm
- 2000 rpm
- 3000 rpm
- 4000 rpm
Q19 | In drying process, the heat required to convert one kilogram of grain moisture to water vapour is
- 450 kcal
- 500 kcal
- 550 kcal
- 650 kcal
Q20 | The ratio of rolling resistance to dynamic load is
- Coefficient of traction
- Tractive efficiency
- Coefficient of rolling resistance
- Rolling resistance
Q21 | A speed of centrifugal dehusker ranges between
- 1500-2000 rpm
- 2000-2500 rpm
- 2500-3000 rpm
- 3000-3500 rpm
Q22 | The mounted type seed drill attached to tractor by
- Single hitch point
- Two hitch-point
- Three point hitch
- Shank
Q23 | The hydrological flood routing method used is
- Energy equation
- Equation of motion
- Equation of continuity
- All are correct
Q24 | Slogging or lugging ability is associated with
- Engine speed
- Engine torque
- Engine load
- All are correct
Q25 | A dynamically balanced mower has crank speed of
- 900-1200 rpm
- 1000-1200 rpm
- 1000-1250 rpm
- 1000-1300 rpm