On This Page
This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 2
Q1 | A structure used to carry out irrigation water across the stream, canals, gullies and other natural depression is
- Weir
- Notch
- Flume
- Gate
Q2 | Airplane sprayers and dusters are suitable for
- Small scale work
- Medium scale work
- Large scale work
- All are correct
Q3 | Muffler is provided on tractor to control
- Noise
- Fuel supply system
- Fuel consumption
- Vibration
Q4 | In diesel engines, thermostat valve fully opens at
- 88-90?C
- 90-95?C
- 90-100?C
- 75-110?C
Q5 | Blue smoke indicates
- Presence of water in fuel
- Burning of lubricant in cylinder
- Presence of waer in lubricant
- Rich air and fuel mixter
Q6 | Oil pressure gauge is used
- To check the quality of oil
- To indicate oil temperature in pipeline
- To warn the operator of any irregularity
- All are correct
Q7 | In reaper, a flat plate with two cutting edges is known as
- Cutter bar
- Knife section
- Knife
- All are correct
Q8 | Pressure in pintle type nozzle varies as
- 5-10 Mpa
- 7-15 Mpa
- 7-20 Mpa
- 10-25 Mpa
Q9 | The compression ratio of diesel engine is
- 4 to 8:1
- 14 to 20:1
- 4 to 1:1
- 14 to 22:1
Q10 | Angle between centerline of tyre and vertical line is called
- Camber angle
- Disc angle
- Helix angle
- Relief angle
Q11 | The Englberg huller removes
- Husk from paddy
- Bran from paddy
- Husk and bran from paddy
- Germ from rice
Q12 | Tilt angle of standard disc plough varies from
- 15-25?
- 25-35?
- 35-42?
- 4-45?
Q13 | Acme harrows are mostly used for
- Clod crushing
- Mulching
- Levelling
- All are correct
Q14 | The draft requirement in MB plough compared to disc plough for same depth of ploughing is
- Less
- More
- Equal
- None of these
Q15 | The shape of furrow cut by indigenous plough is
- V-shape
- Rectangular shape
- Trapezoidal shape
- None of these
Q16 | A man can develop
- 0.1 hp
- 0.5 hp
- 0.75 hp
- 1.0 hp
Q17 | A connecting rod of four-stroke engines is subjected to
- Compression and tension
- Compression and side thrust
- Side thrust only
- Compression and twisting
Q18 | A capacity of centrifugal dehusker is about
- 450 kg/h
- 500 kg/h
- 550 kg/h
- 600 kg/hr
Q19 | Cleaning of material is done on the basis of
- Shape
- Size
- Weight
- Density
Q20 | In case of windmill, the ratio of power delivered by rotor to the maximum power available in the wind is
- Rotor coefficient
- Coefficient of performance
- Coefficient of gyration
- None of these
Q21 | Air blast sprayer is used for
- Gardens
- Field crops
- Orchards
- Nursery
Q22 | A pump used in the tractor hydraulic is
- Internal gear pump
- Gyrator gear pump
- Vane type pump
- All are correct
Q23 | The indicator plant used for determining the permanent wilting percentage is
- Wheat
- Safflower
- Sunflower
- Paddy
Q24 | A type of oil filter used in tractor engine is
- Full flows type
- Bi-pass type
- Both (a) & (b)
- None of these
Q25 | A normal size of shoulder bund is provided on bench
- Terrace sloping inward
- Terrace sloping outward
- Level top bench terrace
- All are correct