On This Page
This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 1
Q1 | Coolant pump is
- Vane type
- Gear pump
- Centrifugal pump
- All are correct
Q2 | Flow mass curve is an integral curve of
- Flow-duration curve
- S-curve
- Hyetograph
- Hydrograph
Q3 | The size of power thresher is determined by
- Width of cylinder and straw rack
- Diameter of cylinder and straw rack
- Rpm of cylinder and straw rack
- All are correct
Q4 | Curve number method estimates the
- Runoff rate
- Director runoff
- Sub-surface runoff
- Both (b) & (c)
Q5 | The knife of cutter bar of animal-crawn reaper is made of
- Mild steel
- Cast iron
- High carbon steel
- Low carbon steel
Q6 | A tillage system in which the field is ploughed and followed by row crop planter directly is
- Zero tillage system
- Plough plant
- Rotary tillage system
- Till plant system
Q7 | Working temperature of diesel engine ranges from
- 71-82?C
- 82-88?C
- 75-80?C
- None of these
Q8 | Colloid mill is used for
- Puree making
- Food pastes formation
- Pulp formation
- All are correct
Q9 | Vegetable lubricants are made from
- Castor oil
- Cotton seed oil
- Olive oil
- All are correct
Q10 | The capacity of manual operated rotary paddy thresher is
- 1 to 2 q/day
- 3 q/day
- 4 q/day
- 5 q/day
Q11 | In force feed lubrication system, the gear used is
- Helical gear
- Spur gear
- Both (a) & (b)
- None of these
Q12 | Soil erosion is more when
- Panly impact of raindrop
- Raindrop impact along with overland flow
- Only overland flow
- All are correct
Q13 | When the temperature is raised to 38.3?C the gas production increased by
- 25%
- 40%
- 50%
- 75%
Q14 | The horsepower required for tractor-operated potato digger is
- 30 hp
- 35 hp
- 45 hp
- 50 hp
Q15 | One-way plough requires laying out a field in lands, ending with
- Dead furrow
- Back Furrow
- Both (a) & (b)
- None of these
Q16 | Tractor drawn implements have
- High speed and higher working capacity
- Lower speed and lower working capacity
- Higher speed and lower working capacity
- Lower speed and higher working capacity
Q17 | The standard speed of a 21 spline PTO shaft is
- 540
- 540 rpm
- 1000 rpm
- 10000 rpm
Q18 | A high gas production achieved from biogas plant when inside temperature of the chamber is
- 15?C
- 10?C
- 35?C
- 50?C
Q19 | The output capacity of hand beating method is about
- 5-10 kg/h
- 10-15 kg/ha
- 17-20 kg/h
- 20-25 kg/h
Q20 | According to colling, the draft to MB plough due to cutting slice is
- 34%
- 48%
- 68%
- Above 68%
Q21 | Wick lubrication is also called
- Siphon lubricator
- Hydrostatic lubricator
- Mechanical lubricator
- None of these
Q22 | The discharge per unit draw down at a well is known as
- Specific yield
- Specific storage
- Specific capacity
- None of these
Q23 | A PTO shaft with diameter 3.6 cm and 6 splined, standard PTO rpm will be
- 540
- 540
- 1000
- None of these
Q24 | Rice yield can increased due to improved mining equipments by
- 1-2%
- 2-3%
- 3-4%
- 4-5%
Q25 | The life of spark plug used in 2-stroke engine as compared to 4-stroke engines is
- Same
- Twice
- Thrice
- One-half