On This Page
This set of Agricultural Engineering Multiple Choice Questions & Answers (MCQs) focuses on Agricultural Engineering Set 68
Q1 | The operating speed of combine in field varies from
- 2-6.4 kmph
- 2-8 kmph
- 4-10 kmph
- 4-12 kmph
Q2 | The speed of hand-operated winnowing fan varies from
- 100-200 rpm
- 200-350 rpm
- 300-450 rpm
- Above 450 rpm
Q3 | The material used for construction of blade of winnower is
- Aluminium sheet
- Low grade carbon steel
- Mild steel
- High grade carbon steel
Q4 | The harrow used for smoothening and levelling the soil after ploughing is
- Spring tyne harrow
- Spike tooth harrow
- Offset disc harrow
- Tandem disc harrow
Q5 | The cutting blade used in subsoiler is made from
- Mild steel
- Cast iron
- Low carbon steel
- High carbon steel
Q6 | Lay shaft is also termed as
- Output shaft
- Input shaft
- Counter shaft
- All are correct
Q7 | One tone of refrigeration implies the colling effect equal to
- 144 BTU/sec
- 200 BTU/sec
- 60 kcal/min
- 120 kcal/min
Q8 | Spray gun is known as
- Nozzle
- Lance
- Nozzle disc
- Trigger
Q9 | Multiple disc clutches is
- Wet type
- Dry type
- Both (a) & (b)
- None of these
Q10 | In gliding gear transmission system, the gear used is
- Spiral
- Spur
- Bevel
- Helical
Q11 | Blades of sail unit are made of
- Wood
- Canvas cloth
- Metal
- All are correct
Q12 | The width and depth of cut of disc harrow is controlled by
- Weight of the implement
- Gang angle mechanism
- Diameter of discs
- All are correct
Q13 | The plough that does not leave any back as well as dead furrow is
- One-way plough
- Disc plough
- Two--way plough
- Shabas plough
Q14 | Of the following which type of governing system is used in the gas engines?
- Hit and miss system
- Throttle system
- Variable speed governor
- Constant speed governor
Q15 | The spacing between discs in light duty harrow is
- 5-6 inch
- 6-9 inch
- 10-12 inch
- Above 12 inch
Q16 | The firing interval of 2-strike two-cylinder engine is
- 90
- 180
- 360
- 720
Q17 | The coulters used for cutting heavy trashes are
- Plain coulter
- Rolling plain coulter
- Notch coulter
- None of these
Q18 | The quantity of water going through various individual path of hydrological cycle can be described by
- Continuity equation
- Water budget equation
- Hydrologic equation
- All are correct
Q19 | The pressure of water vapour for each 10?C rise in temperature is nearly
- Half
- Double
- Triple
- None of these
Q20 | A power tiller operates most satisfactory with
- Reaper
- M.B plough
- Disc harrow
- Rotary tillage tool
Q21 | The violent noise head in engine during process of combustion is
- Scavenging
- Detonation
- Wearing
- All are correct
Q22 | A ridger is used for
- Clod crushing
- Making channel
- Mulching
- Seed bed preparation
Q23 | In SI engine, intake opens about
- 10 deg before TDC
- At TDC
- 10 deg after TDC
- 20 deg after TDC
Q24 | Junker's calorimeter is used for determining the calorific value of
- Liquid fuels
- Solid fuels
- Gaseous fuels
- None of these
Q25 | A multi crop threshers is equipped with
- Spike tooth cylinder
- Rasp bar cylinder
- Hammer mill cylinder
- All of above