On This Page
This set of Production Engineering Multiple Choice Questions & Answers (MCQs) focuses on Production Engineering Set 14
Q1 | Coarse feed, low rake angle, low cutting speed and insufficient cooling help produce
- continuous chips with built up edges in ductile materials
- discontinuous chips in brittle materials
- discontinuous chips in ductile materials
- continuous chips in ductile materials
- Parting off
Q2 | The chisels used in sheet metal work have
- Rounded cutting edge
- Straight cutting edge
- Any of (A) or (B)
- Parting off
Q3 | The processes used for the machining of sintered and tungsten carbide is
- Grinding process
- Electroforming process
- Explosive forming process
- Turning process
- None of the above
Q4 | Nitrided steel is used for gears where
- Variable load operation is desired
- Low speed operation is desired
- Varying stresses are expected on teeth
- High hardness is desired on teeth
- Variable speed operation is desired
Q5 | Which one of the following cannot be used as a moulding material
- Wood
- Cement
- Glass
- Paper
- Rubber
Q6 | Severe quenching may lead to
- superficial hardness
- blow holes
- formation of cracks
- warping
- Parting off
Q7 | Steel balls are required in large quantities. Which process would you select for the manufacture?
- Cold heading
- Turning on a Capstan of Turret lathe
- Casting
- Turning on a lathe
- Turning on a automatic lathe
Q8 | A half nut is
- A double start nut for a quick shift
- Mechanism that locks the lathe carriage to the lead screw for thread cutting
- Nut with half the standard pitch
- Damaged nut
- Nut manufactured in parts
Q9 | Out of the following materials which one will have lowest temperature of freezing?
- Copper
- Zinc
- Gold
- Lead
- Tungsten
Q10 | Trepanning tool is used on
- Milling machine
- Planers
- Lathes
- Power presses
- Cold heading machine
Q11 | A blunt tool is used in
- knurling
- piercing
- Parting off
- gear shaving
- hot spinning.
Q12 | Suitable change wheels for cutting 17 T.P.I. on 4 T.P.I. lead screw lathe are
- 10 to 65
- 15 to 85
- 20 to 85
- 30 to 105
- None of the above
Q13 | For the measurement of velocity, the transduction method could be
- Capacitive
- Inductive
- Magneto-electric
- Photoelectric
- Any of the above
Q14 | Burnishing operation is done with the help of
- Abrasives
- Dielectrics
- Balls
- Lubricating oils
- Any of the above
Q15 | Which of the following process connot be carried out on lathe machine?
- Notching
- Riveting
- Punching
- Blanking
- All of the above
Q16 | Which of the following operations is known as 'sweating'
- Tinning the two surfaces to be joined, applying flux and heating
- Heating two surfaces to be joined, to the high temperature in presence of flux
- Heating two surfaces at low temperature
- Joining of two surfaces without use of flux
- None of the above
Q17 | The stake used for making conical shapes is known as
- Parting off
- Hatchet stake
- Funnel stake
- Moon stake
Q18 | A special form of piercing in which the entire contour is not cut, is known as
- Lancing
- Notching
- Trimming
- Slotting
- None of the above
Q19 | Carbon tool steels generally loose their hardness above
- 50?C
- 200?C
- 100?C
- Parting off
- 125?C
Q20 | Loading of grinding wheel occurs when
- Parting off
- part of grinding surface gives way
- long cracks develop on grinding wheel from centre to outer diameter
- abrasive grains become clogged with particles of metal being ground
- follow cavities are formed on the surface of grinding wheel
Q21 | Preferred numbers are the numbers in
- arithmetic progression
- Parting off
- harmonic progression
- Logarithmic progression
- geometric progression
Q22 | Surveying tapes are generally made of
- Invar
- Nichrome
- Constantan
- Nicheloy
- Muntz metal
Q23 | In gas welding, the welding rods of 30 mm diameter are available. What will be the maximum thickness of material that can be welded with this rod?
- 3 mm
- 25 mm
- 12 mm
- 6 mm
- 30 mm
Q24 | The temperature scanning system are used
- Where temperature control at a point is important
- Where temperature difference between two points is important
- Where system is capable of working without temperature control
- Where monitoring of a relatively large number of temperatures is needed
- None of the above
Q25 | A good cutting action is indicated by
- High cutting ratio
- Low cutting ratio
- Low chip reduction coefficient
- None of the above
- Bakelite