On This Page
This set of Theory of Machines Multiple Choice Questions & Answers (MCQs) focuses on Theory Of Machines Set 10
Q1 | The key generally used in wrist watches is
- Saddle key
- Sunk key
- Wood ruff key
- Tangent key
- None of the above
Q2 | In case of involute the angular velocity ratio is
- Directly proportional to radius of base circle from which the involute was generated
- Inversely proportional to radius of base circle from which the involute was generated
- Directly proportional to the distance of the chord over which thread is unwound
- Inversely proportional to the distance of the chord over which thread is wound
- None of the above
Q3 | Which one of the following is not a spring controlled governor?
- Porter governor
- Hartnell governor
- Pickering governor
- None of the above
- None of the above
Q4 | The purpose of differential in locmomtive is served by
- Shape of rails
- Taper on wheels
- Taper on rails
- Track contour
- Track curvature
Q5 | The normal at any point of a involute is
- Also normal to that circle
- Tangent to the circle
- Is inclined to the normal to the circle at an angle equal to pressure angle
- Is inclined to the tangent to the circle at an angle equal to the pressure angle
- None of the above
Q6 | The number of links in Paucellier mechanism is
- 4
- 5
- 6
- 8
- None of the above
Q7 | A point on a link connecting double slider crank chain will trace a (an)
- Straight line
- Parabola
- Ellipse
- Hyperbola
- Circle
Q8 | The differential gear in the automobiles is used to
- Provide balancing
- Assist in changing speed
- Help in turning
- Provide jerk free movement of vehicle
- Reduce speed
Q9 | The abbreviation P.I.V. drive system stands for
- Purely Integral Variance
- Positive Infinitely Variable
- Periodic Ideal Vibrationless
- Polar Inertia Vee belt
- Perfectly Induced Velocities
Q10 | The Biflar susperision method is used to determine
- Position of balancing weights
- Centripetal acceleration
- Natural frequency of vibration
- Moment of inertia
- None of the above
Q11 | A Scott-Russel mechanism consists of
- Turning and rotary pairs
- Turning pair only
- Sliding and turning pairs
- Sliding and rotary pairs
- Rotary pair only
Q12 | If three bodies have plane motions, their instantataneous centres
- Lie in different planes
- Lie in a plane perpendicular to the plane of motion
- Lie in the same plane as the plane of motion
- Lie on a straight line
- None of the above
Q13 | The prime circle of a cam is
- The smallest circle drawn to the pitch curve from the centre of rotation of curve
- The smallest circle drawn to the cam profile from the centre of rotation of a radial cam
- The circle with centre as the centre of cam axis and radius such that it passes through the pitch point
- The circle fitting in cam profile
- None of the above
Q14 | A pulley in a belt drive acts as a
- Rolling pair
- Turning pair
- Surface pair
- Sliding pair
- Cylindrical pair
Q15 | In the gear box of an automobile, which gear train is used?
- Simple gear train
- Compound gear train
- Epicyclic gear train
- None of the above
- None of the above
Q16 | The locus of a point one the circumference of a circle which rolls without slipping on a fixed straight line, is known as
- Involute
- Epicycloid
- Cycloid
- Hypocycloid
- None of the above
Q17 | Stub tooth is
- Shorter than standard tooth depth
- Standard gear tooth
- Equivalent rack tooth
- Non-standard tooth
- Longer than standard tooth depth
Q18 | Which of the following road offers maximum resistance to automobiles?
- Wood paving
- Macadam
- Well rolled ground
- Loose sand
- None of the above
Q19 | In case of worm and worm wheel, the maximum efficiency is obtained when
- Worm is driver
- Worm wheel is driver
- Either of the worm or worm wheel is a driver
- Depends on other factors
- None of the above
Q20 | In a balancing machine, the units for unbalance measurement are
- gm-cm-cps
- cps
- cm
- gram
- gm-cm
Q21 | The type of teeth used on a gear used in sugar crushing is
- Hyperboild
- Semi-epicycloidal
- Involute
- Cycloidal
- Epicycloidal
Q22 | In a pin jointed mechanism, the line of thrust on a link is
- tangential to the friction circles at the ends
- along the friction axis
- inclined to axis of link by an angle ?, known as angle of friction
- All the above
- None of the above
Q23 | In automobiles, Hooke's joint is used between
- Flywheel and clutch
- Clutch and gear box
- Gear box and differential
- Differential and wheels
- None of the above
Q24 | A pair is termed as a higher pair when relative motion between two elements of the pair is
- partly sliding and partly turning
- rolling only
- Outer circle
- sliding only
- turning only
Q25 | The swaying couple in a locomotive is due to
- unbalanced primary forces
- unbalanced secondary forces
- partial balancing
- None of the above
- None of the above