Mechanical Measurements Set 8

On This Page

This set of Mechanical Measurements Multiple Choice Questions & Answers (MCQs) focuses on Mechanical Measurements Set 8

Q1 | Which of the following has the number of significant figures other than 3?
  • 0.346 K?
  • 1.65 V
  • 542 A
  • 14
  • 4 x 102
Q2 | Which of the following device can be used to measure temperatures of hot bodies radiating energy in visible spectrum
  • Bolometer
  • Optical pigometer
  • Thermopile
  • Piezometer
  • Planimeter
Q3 | A strobotron is
  • A tachogenerator
  • A two winding dc generator
  • A hot cathode gaseous discharge tube
  • A device for temperature measurement
  • None of the above
Q4 | A transducer which converts an input physical quantity into electrical output in the form of pulse is known as
  • primary transducer
  • analogous transducer
  • digital transducer
  • None of the above
  • Any of the above
Q5 | Which of the following Bourdon tube material can be used for very high pressures?
  • K-monel
  • Alloy steel
  • Phosphor bronze
  • Stainless steel
  • Beryllium copper
Q6 | The adhesion between the surface of property wrung gage blocks is of the order of
  • 0-5 atmospheres
  • 5-10 atmospheres
  • 20-30 atmospheres
  • none of the above
  • Any of the above
Q7 | Under force-current analogy, displacement is considered as analogous to
  • Voltage
  • Magnetic flux linkage
  • Induced emf
  • Current
  • Mutual inductance
Q8 | The temperature of freezing mercury is
  • ?225?C
  • ?39?C
  • ?69?C
  • 0?C
  • ?169?C
Q9 | The function of the reference electrode in a pH meter is to
  • Measure average pH value
  • Produce a constant voltage
  • Provide temperature compensation
  • Produce a constant current
  • None of the above
Q10 | In a digital instrument "over ranging" means
  • Parameter being measured is varying constantly
  • All digits indicte reading of 8
  • Half digit is switched off
  • Half digit is switched on
  • Only three digits are switched on
Q11 | Decibels are basically measures of
  • power gain
  • voltage fain
  • current gain
  • None of the above
  • Any of the above
Q12 | The maximum allowable limit that a measurement may vary from the true value is called
  • Expected error
  • Range of error
  • Permissible error
  • Least error
  • Safe error
Q13 | Accelerometer is the transducer for
  • Vibration
  • Shock
  • Absolute motion
  • All of the above
  • None of the above
Q14 | Which of the following material has maximum temperature coefficient of resistance
  • Nichrome V
  • Isoelastic
  • Manganin
  • Monel
  • Any of the above
Q15 | A tellurometer works on the principle of
  • X-rays
  • Optics
  • Reflection of light
  • High frequency radio waves
  • Propagation of modulated waves
Q16 | The salinometer measures
  • Density of brine
  • Specific gravity of molasses
  • Sould level
  • Temperature in cryogenic regions
  • Intensity of illumination
Q17 | A hot wire anemometer is used to measure
  • pressure of liquids
  • very low pressure
  • gas velocities
  • None of the above
  • Any of the above
Q18 | Ionisation gauge is used to measure pressures
  • Below 3 microns
  • Above 3 microns
  • Above 100 microns
  • Between 100 and 200 microns
  • Above 200 microns
Q19 | Which of the following torque transducer needs battery or rectified ac source for its operation?
  • Strain gauge
  • Differential transformer
  • Variable permeability transducer
  • Optical transducer
  • All of the above
Q20 | Synchronization in a CRO means
  • holding a pattern on the screens without creep
  • continuously monitoring the trace
  • adjusting sweep frequency
  • All of the above
  • Any of the above
Q21 | Ceremets are
  • Resistance elements
  • Ganged condensers
  • Variable capacitors
  • Multi-turn potentiometers
  • Defects in transducers
Q22 | Flow in an open channel can be measured by
  • a manometer
  • orifice
  • nozzle
  • None of the above
  • Any of the above
Q23 | The flow in open channel can be measured by
  • Venturimeter
  • Rotameter
  • Pitot tube
  • Orifice
  • Turbine meter
Q24 | A geodimeter is used for the measurement of
  • area
  • angles
  • distance
  • None of the above
  • Any of the above
Q25 | Temperature of a hot moving body can be measured by
  • a radiation pyrometer
  • an optical pyrometer
  • a resistance thermometer
  • None of the above
  • Any of the above