On This Page
This set of Engineering Materials Multiple Choice Questions & Answers (MCQs) focuses on Engineering Materials Set 12
Q1 | If steel is slowly cooled in furnace, the structure obtained is
- Pearlite
- Martensite
- Sorbite
- Acicular
- Troosite
Q2 | Machinability of a metal depends on
- Tensile strength
- Hardness
- Toughness
- (A) and (B) above
- (B) and (C) above
Q3 | Which is expected to be strongest in tension?
- Aluminium wire
- Mild steel wire
- Piano wire
- Stainless steel wire
- Brass wire
Q4 | When metal is deformed by cold work, severe stresses known as residual stresses are undesirable and to remove them
- The metal should be stressed in reverse direction
- The metal should be painted
- The metal should be reheated below recrystallization temperature
- The metal should be reheated above recrystallization temperature
- None of the above
Q5 | The ability of a tool to resist softening at high temperatures is known as
- Super hardness
- Red hardness
- Extended hardness
- Double hardness
- None of the above
Q6 | Which of the following is a mesomorphous material?
- Silver
- Brass
- Mica
- Gold
- Glass
Q7 | Electron with energy level of 2 MeV is considered as
- Fast electron
- There is no consideration as such
- Dead slow electron
- Slow electron
- Super-fast electron
Q8 | Shot peening
- Changes the crystalline structure of material
- Refines the grain structure
- Is done at recrystallization temperature
- Improves fatigue life of small parts
- Causes metal surface to be in tension and the layer beneath in compression
Q9 | when atoms are hold together by the sharing of valence electrons
- They form a covalent bond
- The valence electrons are free to move away from the atom
- Each shared electron leaves a hole
- Each atom becomes free to move
- None of the above
Q10 | When piece of 0.2% carbon steel is heated above third critical point the steel is a solid solution of carbon in gamma iron and called
- Ferrite
- Austenite
- Pearlite
- Eutectoid
- Cementite
Q11 | The common household glass is
- Lead glass
- Borosilicate glass
- Semi-conductors
- Soda lime glass
- High silica glass
Q12 | Silicon doped with phosphorous is an
- intrinsic semi-conductor
- extrinsic semi-conductor
- p-type semi-conductor
- n-type semi-conductor
- None of the above
Q13 | When a normal atom loses an electron, the atom
- Becomes a positive ion
- Becomes a negative ion
- Becomes a electrically neutral
- Is then free to move about
- None of the above
Q14 | Steel pipes are generally manufactured by
- Forging process
- Machining process
- Extrusion process
- Cold working process
- Electroforming process
Q15 | Which of the following class of materials are good conductors of heat and electricity?
- Polymers
- Dielectries
- Ceramics
- Semi-conductors
- Metals
Q16 | The ability of a material to absorb energy in the plastic range is known as
- Fatigue strength
- Resilience
- Toughness
- Hardness
- Creep
Q17 | Sorbite' is obtained when
- Quenching steel during transformation
- Steel is annealed
- A fully hardened steel is finally 'drawn' at about 677?C
- None of the above
- Copper nickel and chromium
Q18 | Selenium is an
- intrinsic semi-conductor
- extrinsic semi-conductor
- p-type semi-conductor
- n-type semi-conductor
- None of the above
Q19 | In ferromagnetic materials
- the atmic magnetic moments are anti-parallel and unequal
- the atomic magnetic moments are parallel
- the constituent is iron only
- one of the constituent is iron
- None of the above
Q20 | Machining properties of steel are improved by adding
- Chromium
- Lead
- Nickel
- Silicon
- Cobalt
Q21 | In compression, a prism of brittle material will break
- Into large number of pieces
- By forming a bulge
- By shearing slong oblique plane
- In a direction along the direction of load
- None of the above
Q22 | Monel metal consists of
- At which change of allotropic form takes place.
- Aluminium copper and nickel
- Zinc, copper and lead
- Zinc nickel and copper
- Nickel, lead and tin
Q23 | Cadmium sulphide cell is a
- Photo conductive cell
- Solar cell
- Thermocouple
- Photovoltaic cell
- Photo emissive cell
Q24 | Which process is different from the others
- Drop forging
- Cold extruding
- Sand blasting
- Short peening
- Cold heading
Q25 | By alloying copper with manganese which of the following increases?
- Specific gravity
- Tensile strength
- Melting point
- Electrical conductivity
- None of the above