Digital Electronics Set 16
On This Page
This set of Digital Electronics Multiple Choice Questions & Answers (MCQs) focuses on Digital Electronics Set 16
Q1 | Which of the following control signals are selected for read and write operations in a RAM?
- data buffer
- chip select
- read and write
- memory
Q2 | Computers invariably use RAM for
- high complexity
- high resolution
- high speed main memory
- high flexibility
Q3 | How many types of RAMs are?
- 2
- 3
- 4
- 5
Q4 | Static RAM employs
- bjt or mosfet
- fet or jfet
- capacitor or bjt
- bjt or mos
Q5 | Dynamic RAM employs
- capacitor or mosfet
- fet or jfet
- capacitor or bjt
- bjt or mos
Q6 | Which one of the following is volatile in nature?
- rom
- erom
- prom
- ram
Q7 | The magnetic core memories have been replaced by semiconductor RAMs, why?
- semiconductor rams are highly flexible
- semiconductor rams have highest storing capacity
- semiconductor rams are smaller in size
- all of the mentioned
Q8 | The data written in flip-flop remains stored as long as
- d.c. power is supplied
- d.c. power is removed
- a.c. power is supplied
- a.c. power is removed
Q9 | What is memory decoding?
- the process of memory ic used in a digital system is overloaded with data
- the process of memory ic used in a digital system is selected for the range of address assigned
- the process of memory ic used in a digital system is selected for the range of data assigned
- the process of memory ic used in a digital system is overloaded with data allocated in memory cell
Q10 | The first step in the design of memory decoder is
- selection of a eprom
- selection of a ram
- address assignment
- data insertion
Q11 | How many address bits are required to select memory location in Memory decoder?
- 4 kb
- 8 kb
- 12 kb
- 16 kb
Q12 | How memory expansion is done?
- by increasing the supply voltage of the memory ics
- by decreasing the supply voltage of the memory ics
- by connecting memory ics together
- by separating memory ics
Q13 | IC 4116 is organised as
- 512 * 4
- 16 * 1
- 32 * 4
- 64 * 2
Q14 | To construct 16K * 4-bit memory, how many 4116 ICs are required?
- 1
- 2
- 3
- 4
Q15 | How many 1024 * 1 RAM chips are required to construct a 1024 * 8 memory system?
- 4
- 6
- 8
- 12
Q16 | How many 16K * 4 RAMs are required to achieve a memory with a capacity of 64K and a word length of 8 bits?
- 2
- 4
- 6
- 8
Q17 | The full form of PLD is
- programmable load devices
- programmable logic data
- programmable logic devices
- programmable loaded devices
Q18 | PLD contains a large number of
- flip-flops
- gates
- registers
- all of the mentioned
Q19 | Logic circuits can also be designed using
- ram
- rom
- pld
- pla
Q20 | How many types of PLD is?
- 2
- 3
- 4
- 5
Q21 | PAL refers to
- programmable array loaded
- programmable logic array
- programmable array logic
- programmable and logic
Q22 | Outputs of the AND gate in PLD is known as
- input lines
- output lines
- strobe lines
- control lines
Q23 | PLA contains
- and and or arrays
- nand and or arrays
- not and and arrays
- nor and or arrays
Q24 | PLA is used to implement
- a complex sequential circuit
- a simple sequential circuit
- a complex combinational circuit
- a simple combinational circuit
Q25 | A PLA is similar to a ROM in concept except that
- it hasn’t capability to read only
- it hasn’t capability to read or write operation
- it doesn’t provide full decoding to the variables
- it hasn’t capability to write only