On This Page
This set of Digital Logic Circuits DLC Multiple Choice Questions & Answers (MCQs) focuses on Digital Logic Circuits Set 2
Q1 | Diode–transistor logic (DTL) is the direct ancestor of
- register-transistor logic
- transistor–transistor logic
- high threshold logic
- emitter coupled logic
Q2 | In DTL logic gating function is performed by
- diode
- transistor
- inductor
- capacitor
Q3 | In DTL amplifying function is performed by
- diode
- transistor
- inductor
- capacitor
Q4 | How many stages a DTL consist of?
- 2
- 3
- 4
- 5
Q5 | The full form of CTDL is
- complemented transistor diode logic
- complemented transistor direct logic
- complementary transistor diode logic
- complementary transistor direct logic
Q6 | The DTL propagation delay is relatively
- large
- small
- moderate
- negligible
Q7 | The way to speed up DTL is to add an across intermediate resister is
- small “speed-up” capacitor
- large “speed-up” capacitor
- small “speed-up” transistor
- large ” speed-up” transistor
Q8 | The process to avoid saturating the switching transistor is performed by
- baker clamp
- james r. biard
- chris brown
- totem-pole
Q9 | A major advantage of DTL over the earlier resistor–transistor logic is the
- increased fan out
- increased fan in
- decreased fan out
- decreased fan in
Q10 | To increase fan-out of the gate in DTL
- an additional capacitor may be used
- an additional resister may be used
- an additional transistor and diode may be used
- only an additional diode may be used
Q11 | A disadvantage of DTL is
- the input transistor to the resister
- the input resister to the transistor
- the increased fan-in
- the increased fan-out
Q12 | Compatibility refers to
- the output of a circuit should match with the input of another circuit
- the output of a circuit should match with the input of the same circuit
- the input of a circuit should match with the output of another circuit
- the input of a circuit should match with the output of same circuit
Q13 | The method of connecting a driving device to a loading device is known as
- compatibility
- interface
- sourcing
- sinking
Q14 | The first CML logic was introduced by General Electric in
- 1960
- 1981
- 1961
- 1990
Q15 | Schottky families prevent the saturating using
- transistors
- schottky transistors
- diodes
- schottky diodes
Q16 | The basic idea of basic CML circuit came from an
- inverter
- buffer
- transistor
- both inverter and buffer
Q17 | The full form of MECL is
- mono emitter coupled logic
- motorola emitter coupled logic
- motorola emitter capacitor logic
- both mono emitter and motorola coupled logic
Q18 | Motorola has offered MECL circuits in logic families.
- 3
- 4
- 5
- 6
Q19 | The latest entrant to the ECL family is
- ecl 10k
- ecl 100k
- ecl 1000k
- ecl 10000k
Q20 | All input of NOR as low produces result as
- low
- mid
- high
- high impedance
Q21 | In RTL NOR gate, the output is at logic 1 only when all the inputs are at
- logic 0
- logic 1
- +10v
- floating
Q22 | The full form of CMOS is
- capacitive metal oxide semiconductor
- capacitive metallic oxide semiconductor
- complementary metal oxide semiconductor
- complemented metal oxide semiconductor
Q23 | The full form of COS-MOS is
- complementary symmetry metal oxide semiconductor
- complementary systematic metal oxide semiconductor
- capacitive symmetry metal oxide semiconductor
- complemented systematic metal oxide semiconductor
Q24 | CMOS is also sometimes referred to as
- capacitive metal oxide semiconductor
- capacitive symmetry metal oxide semiconductor
- complementary symmetry metal oxide semiconductor
- complemented symmetry metal oxide semiconductor
Q25 | CMOS technology is used in
- inverter
- microprocessor
- digital logic
- both microprocessor and digital logic