On This Page
This set of Structural Mechanics Multiple Choice Questions & Answers (MCQs) focuses on Structural Mechanics Set 7
Q1 | The direction of bending stresses is along the
- Axial direction
- Lateral direction
- Inclined direction
- None
Q2 | Bending stresses in a beam vary
- Linearly
- Parabolically
- Cubic variation
- None
Q3 | Bending stresses in a beam are of
- Constant values
- Variable values
- Constant nature
- None
Q4 | Pure bending of beam will have
- Tensile and shear stresses
- Compressive and shear stresses
- Tensile and compressive stresses
- None
Q5 | In a cantilever beam, fibers below the neutral axis are in
- Tension
- Shear
- Compression
- None
Q6 | In a S.S. beam, fibers below the neutral axis are in
- Tension
- Shear
- Compression
- None
Q7 | In a cantilever beam, fibers above the neutral axis are in
- Tension
- Shear
- Compression
- None
Q8 | Bending occurs due to the application of
- Load parallel to the axis of the beam
- Load inclined to the axis
- Load perpendicular to the axis
- None
Q9 | Bending occurs due to the application of
- Axial load
- Lateral load
- Torsional load
- None
Q10 | The bending stress is
- Directly proportional to the distance of layer from the neutral layer
- Inversely proportional to the distance of layer from the neutral layer
- Directly proportional to the neutral layer
- Does not depend on the distance of layer from the neutral layer
Q11 | On bending of a beam, which is the layer which is neither elongated nor shortened?
- Axis of load
- Neutral axis
- Center of gravity
- None of the mentioned