You can make sure that warning lights are working by?
turning the ignition switch on
The temperature light or gauge indicates the temperature of the?
engine coolant
The brake-system warning light tells you?
the braking system is not working properly
What should you do if the brake-system warning light comes on?
gradually stop, have the vehicle towed, and have the problem corrected
When the ignition switch is turned to "lock,"?
the shift lever and the steering wheel are locked
Cruise control allows the driver to?
maintain desired speed for highway or expressway driving
Adjust a safety belt so it?
fits snugly
With both inside and left-side rear view mirrors adjusted properly, the?
right rear blind spot and smaller blind spot to the left will remain
The material you should use in the windshield washer container?
is usually a special windshield washing solution
As you are about to enter the car from the street side, you should?
not open the door if an oncoming vehicle is near
What is the last thing you do as a check inside the car?
fasten your safety belt
Driving in OVERDRIVE saves fuel and?
can be used in all normal forward driving
When starting a car with an automatic transmission, the selector level should be in?
Park (P) or Neutral (N)
If your vehicle has fuel injection and the engine is cold?
keep your foot off the accelerator
If there is an airbag in your vehicle's steering wheel, keep your hands in the?
9 and 3 or 8 and 4 o'clock positions
A stationary object that appears in the distance in the center of your path of travel is called?
a target
Before shifting from PARK to DRIVE, you should?
press down on the foot-brake pedal
Before entering traffic from the curb, you should?
Check traffic ahead, in both rear view mirrors, and over your left shoulder.
Which of the following statements gives the best understanding of braking?
the pedal pressure should be gradual and firm to stop the car
The last thing to do when leaving your car is to?
lock all doors
You are starting stick shift car. Your left foot should be on the?
clutch pedal
Riding the clutch?
causes needless clutch wear
Signal your intention to stop by?
tapping the foot-break pedal
When stopping from FIRST, SECOND, or REVERSE gears?
press the clutch pedal down while releasing the accelerator
When shifting gears in a stick-shift vehicle?
there is no correct speed for shifting.