Chap 7 Unit 1 TestOut

Which wireless standard can stream data at a rate of up to 54 Mbps
using a frequency of 5 GHz?

802.11a

Which of the following wireless networking standards uses a
frequency of 5 GHz and supports transmission speeds up to 1.3 Gbps?

802.11ac

The 802.11ac wireless networking standard provides increased
bandwidth and communication speeds by using which of the following
technologies? (Select TWO).

MU-MIMO to allow multiple users to use the same channel.
Channel bonding to combine more channels in the 5 GHz band to
allow for up to 160-MHz-wide channels.

Which IEEE wireless standards specify transmission speeds up to
54 Mbps? (Select TWO.)

802.11a, 802.11g

Which data transmission rate is defined by the IEEE 802.11b wireless
standard?

11mbps

Which of the following are characteristics of the 802.11g wireless
standard? (Select THREE.)

Maximum bandwidth of 54 Mbps
Backwards compatible with 802.11b devices
Operates in the 2.4 GHz range

You are designing a wireless network for a client. Your client needs
the network to support a data rate of at least 150 Mbps. In addition,
the client already has a wireless telephone system installed that
operates 2.4 GHz. Which 802.11 standard will work

802.11n

You have been contacted by OsCorp to recommend a wireless internet
solution. The wireless strategy must support a transmission range of
150 feet, use a frequency range of 2.4 GHz, and provide the highest
possible transmission speeds. Which of the followin

802.11n

Which type of configuration would you use if you wanted to deploy
802.11n technology to communicate directly between two computers
using a wireless connection?

Ad hoc

One of your customers wants to configure a small network in his home.
The home has three floors, and there are computers on each floor.
This customer needs to share files between computers, print to a
centrally located printer, and have access to the inte

Configure a Wi-Fi infrastructure network.

A customer is experiencing a sporadic interruption of their Wi-Fi
network in one area of their building. A technician investigates and
discovers signal interference caused by a microwave oven. The
customer approves replacing the wireless access point that

802.11ac

While configuring a wireless access point device, a technician is
presented with several security mode options.
Which of the following options will provide the most secure access?

WPA2 and AES