752. What document describes step-by-step procedures for performing a maintenance action?
(3-12) MRC
753. You go to the MRC deck to get your maintenance card and it is not there. What do you do?
Immediately inform your work center supervisor
754. What does the "R" mean in M-1R?
situational requirement
755. Who is overall responsible for the 3-M system?
Commanding Officer
756. When hanging authorized danger tags that will accompany you?
no one
757. For a danger/caution tag posting, what does independent review mean?
The checker shall not accompany the person posting tag.
758. What is the only block of the MRC that can be changed by maintenance personnel?
None
759. Which of the periodicity codes fall under I.E.M.?
SU - Start-up
760. What is the source of general safety precautions for forces afloat?
OPNAVINST 5100.19D
761. For the MRC syscom control number 24 DWYG Y, what does the "Y" mean?
Repair parts are required to perform the MRC
762. What is to be done with the tag-out record sheet after tags are hung and independently reviewed?
Kept in the work-center until time to clear.
763. What is the purpose of the 3-M system?
To provide for managing maintenance and maintenance support to help achieve maximum equipment operational readiness
765. An outdated piece of equipment is removed from your work center. What 3-M form should be submitted?
4790.CK
766. What code on a MRC is used to find a suitable replacement for a piece of test equipment?
SPMIG
767. Where can you look to find a brief description of a MRC?
Maintenance index page
768. What two pages are necessary for you to verify a MRC?
LOEP and MIP
769. MIP index of a complete set of MRC's applicable to a system, subsystem or equipment
EGL
770. Used with a controlling MRC when the MRC applies to a number of identical items.
LOEP
771. How often would a MRC M-2 be performed?
Every month
772. What manual do we use for HAZMAT?
HMUG -Hazardous Material User Guide, MSDS- Material safety data sheet
773. IGL final reviewer is?
Department head
774. What are the letter periodicity codes
S- Semi annually
Q- Quarterly
M- Monthly
W- Weekly
D- Daily
R- as Required (situational requirement)
U- Unscheduled Maintenance
LU- Lay-Up Maintenance
PM- Periodic Maintenance
SU- Start-Up Maintenance
777. What is the papa manual 43P1
-Work center Binder
COSAL
coordinated shipboard allowance
781. APL/AEL
allowance parts/equipage list
785. What is a FORCE REVISION?
Archive quarter, sign change page, update LOEP + MIP + MRC's
786. How many quarters are in a year?
4 (jan,apr,jul,oct)
787. Who signs the cycle board?
Dept. head
788. Who signs the weekly board?
DIVO
795. What does # mean?
Mandatory related maintenance
796. IEM category 1?
Remains onboard; 30 days or more inactive
797. IEM category 2?
30 days or more requires corrective maintenance, removed off the ship
802. FBR-
feedback report
803. FBR-cat A?
Non-technical
804. FBR-cat B?
Technical
805. FBR-urgent?
Involves safety of personnel
807. Who electronically signs FBR?
DIVO, DH, 3MC
808. How many quarters are in a cycle board?
24
810. What does it mean if blocks are shaded on the 13-week report?
Underway
811. What is one thing you can change on the MRC that does not need the TYCOMS approval?
Tools
813. What are the different types of tags?
Warning and caution
814. Where would you find and order parts or material related to maintenance?
SPMIG
815. What does 18m-2r mean?
Every 18 months or when required
816. MAINTENANCE ACTIONS FOR IEM
LU - Lay-Up Maintenance, PM - Periodic Maintenance, SU - Start Up Maintenance, OT - Operational Test
818. ONE REASONS FOR USING A FBR MIGHT BE:
SHIFT OF MAINTENANCE RESPONSIBILITY
REQUEST FOR TECHNICAL INFO
ADDING OR DELETING MIPs AND MRCs TO A WORK CENTER
What is SPMIG
Standard pms material identification guide
Who electronically signs FBR
Divo, dept head, 3mc
How many quarters in a cyclye board
24
What is most of the initial on-board supply of water on an ARFF apparatus used for?
To produce enough foam to create the initial rescue pathway
What are the two types of water sources that can be used for replenishing your ARFF?
1) Static water sources 2) pressurized water sources
Of the two types of water sources used to replenish the ARFF apparatus which is more commonly used?
Pressurized water source
What are the two types of foam proportioning found on the ARFF?
1) Low-energy systems 2) high-energy systems
Of the two types of ARFF foam proportioning systems, which is more commonly, found on structural and wildland fire apparatuses?
High-energy systems
In low-energy proportioning systems when is the air introduced to the foam/water solution?
At the nozzle or immediately after the solution is discharged from the nozzle
In high-energy foam proportioning systems when is air introduced to the foam/water solution
Before it is expelled from the nozzle
What type of high-energy system maybe used in ARFF applications?
CAFS-compressed air foam system
When using an around-the-pump proportioner how is the foam concentrate drafted into the water stream?
An educator
What are the two types of balanced-pressure systems used in ARFF operations?
1) Bypass-type balanced-pressure systems 2) demand-type balanced-pressure system
What pliers are designed for cutting?
Diagonal pliers are designed for cutting
When using bolt cutters what are the 2 types of metal you should avoid?
Spring metal and tempered metal
What are the 2 types of portable sanders used in the Navy?
Electric and pneumatic
What portable power tool should you use to scale out a corner?
Needle impact scaler
What is the most common measuring tool?
Steel rule tape
What is the purpose of the dynometer?
Measure force or energy
What are the 3 common types of tackles?
Gun, single luff, and two fold purchase
What publication governs the nonskid process?
NSTM Chapter 634
What is the service life limit of COMP G non-skid?
12 months
By what method is nonskid normally applied?
Rolling method
Freshly applied non-skid typically cures fully after what # of days?
7 days
What is the max lifting capacity of the spotting dolly?
16,000
What is the max speed of the A/S32A-32 when it has a load?
2mph
What is the height of spotting dolly?
30 inches
What is the drawbar pull of the spotting dolly?
14,000
What is the gross weight of the spotting dolly?
11,500
Where is the parking brake located on a TMU-70?
In front next to the handling bar
What type of brakes does the A/S-32-31 have?
Wet disc type
When will the brake warning light illuminate on an A/S-32-31A?
When the pressure falls below 1350psi
What is the gross weight of the A/S32A-31A?
12,400
Up to what weight can an A/S32A-42 tow?
100,000
What is the max forward speed of the 42 shore based tractor?
13mph
What is the difference between the Class I and Class II 37(budda)?
Class 2 has a ballast kit installed the class 2 is likely to found where they have poor weather often
What is the transmission for an A/S32A-37?
6 forward speeds and 3 reverse speeds and it is automatic
What is the drawbar pull of the class 1 tow tractor? And the class 2?
20,000lbs; 35,000lbs
What type of inspections will all tow tractors have?
preop insp., periodic insp., and detailed maintenance insp.
What is the danger zone of GTC when operating under load conditions?
10 ft semicircle from its exhaust to 90 degrees on either
How often should you clean a NWC-4?
At least monthly
Wheel chocks for shore stations can be found in how many sizes and what are the sizes?
3; tires up to 33 inches in diameter tires over 33 inches in diameter, to chock dual wheels
What should the deck temperature be when applying non-skid?
55 degree-100degrees f
How much of the surface should be clean of visible residue?
95%
What is the service life of type I COMP G non-skid?
10,000 landings/ 12 months
What is the primary advantage of hydro blasting?
No dust pollution significantly less waste to dispose elimination of FOD
What color is the tramline for LHD type ships?
white
How thick should primer be mixed to?
2-4 mils
What color are the flight deck supervisors' signal wands?
Red and green
Who is responsible for designating and a/c director?
The air officer
What is the amount of feet in front you should avoid how many feet for an AV-8?
40 ft. and 170 ft aft
What is the difference between the E-5 and E-5 mod 1?
The E-5 has two arresting gear cables that are the same length but the E-5 mod 1 are of different lengths
Who must inspect and certify the arresting gears before it is used?
Naval Air warfare center
What type of arresting gear wire is used?
1 inch performed wire 6X19
How do you determine the correct length of an E-5 or E-5 mod installation?
Add 20 feet to the runway length
What manual can you find out information on arresting gears?
NAVAIR 51-5-28
What is determined to be excessive?
Existence of 30 or more broken wires in an abraded area
What is the max life of a CDP?
36 months
What is height of the top of the arresting gear and from the surface to the bottom of the cable?
5 1/2inches and 2 inches
What is the Milspec for the graphite grease?
MIL-G_7711A
What is the minimum amount of donuts installed on a CDP?
8
How should the donuts be laid out for the E-5 arresting gear?
9 ft from center and 5 ft thereafter
How many retention hooks do the E-5 mod 1and3 use?
4
What is the retention hooks used for?
Hold a set of deck pendants in a prescribed geometric pattern the hook is positioned by a dowel pin
If the retention hooks have rotated what does that indicate?
Dowel pin failure
How does chain normally come?
90 ft lengths
What is the run out for an A-3?
2,300 ft
What is the re battery time for heavy chain conf.?
45 min
What is the max weight that an E-28 can accommodate?
78,000lbs
What is the max engagement speed for the E-28?
160 knots
What is the cycle time for the E-28?
80 seconds
What is the function of the retrieve assembly?
To rewind the tape and pretension the pendant after each arrestment
What is the max service life of the CDP for E-28?
24 months
How many broken wires are allowed on the E-28 gear?
9
What is the manual for the E-28 arresting gear?
NAVAIR 51-5-31
How long does the boom adapter have to be load tested?
10 min
A 33,000lb F-18 has blown the nose wheel tire and requires jacking to replace the tire. If the jack is placed on the NLG strut, what is the minimum lift?
6,600lbs (20% of 33,000lbs)
Name 3 hydraulic jacks that are provided for maintenance support of carrier based a/c?
Variable height tripod, fixed height tripod and the hand carried axle
What is a snatch block used for?
Anytime the direction of pull needs to be changed
An OLD frequently used � inch diameter line is being used as a line tag. What is its estimated safe working load?
625 lbs
What is the safe working load of NEW line of � inch line?
1250 lbs
How should forklifts be positioned in relation to the a/c with NLG damaged or collapse?
At right angles
Where should you position the bellyband with the aircraft inverted?
Around the tail of the a/c
How many tiedowns should you use if the a/c is in the catwalk?
Max # of tiedowns
How far from the boat will the coxswain cease towing a helo?
50 yards
The cargo hook on the B&A crane is the rigging line. What is the reaching capability under the surface of the water?
25 ft
What are the pitch and roll limits while hoisting the T-45?
+or- 15 degrees pitch + or - 10 degrees for roll
What is the max hoisting weight for the H-46E?
17,730lbs
How many SCBAs with how many spare cylinders will be prepositioned in the Hangar bay?
Minimum of 2 SCBAs with 4 spare cylinders for each bay
What form should you use to request either regular or emergency leave?
NAVCOMPT form 3065
You are entitled to an annual clothing maintenance allowance after you have been on active duty for what length of time?
6 months
How many types of pay may you receive? What are they?
3; Basic, incentive, special
Pay you get for certain types of duty that are usually considered hazardous?
incentive
During WWII the US built and manned more than how many merchant ships?
6,000
What is use of Naval forces to achieve naval objectives?
naval strategy
What amount of minerals does the United States produce?
11
There are a total of how many US territories?
4
What objective would fall under the term "national objective?
Political, security, and economic
Today, sea power involves which industries?
Marine science, and marine industry
The US coast guard was established as the US Revenue marine in what year?
1790
In what year did Congress enact the Merchant Marine Act?
1936
A broad course of action designed to achieve national objectives?
National strategy
What are the principles of parts of sea power?
Naval power, ocean science, ocean industry, ocean commerce
Conditions that are to the advantage of our nation to pursue or protect?
National interests
In what year did the Geneva convention establish certain rights for POWs?
1949
In what SECNAV instruction can you find out info on transmitting classified material?
SECNAV 5510.36
What does the letter in parentheses such as (S) after a pub title tell you?
The classification of that publication
When locking/unlocking the tail wheel locking pin the towbar attached should not be moved more than how many feet of the centerline?
2ft
Prior to sending a H-60, to the hangar deck what should you do?
Tail wheel strut must be extended for the spotting dolly
What disengages the steering of a nose wheel on an EA-6B?
A tog lock when it is turned 56 degree past from the center
What is the difference between the A-6 a/c and the EA-6B?
EA-6B has a longer fuselage and special antennas
What kind of canopy does an EA-6B have?
Clamshell shell not be opened in winds in excess of 60 knots
Anti icing fluids that are a mixture of 85% alcohol and 15% glycerin burn with what kind of flame
An almost invisible flame
Where can you find AMERICUIM 241?
Laser optical module of the laser transceiveer carried in the forward-looking infrared pod
What 3 repair teams are in the air dept?
Aviation fuel repair team, crash salvage and rescue team hangar deck firefighting and rescue
Where are the controls located for emergency lighting for the flight deck?
Prifly, on the NAV bridge
The weapons staging area is protected by an AFFF sprinkler system consisting of what?
Deck edge nozzles
Requirements for salvage equipment can be found in found in what manual?
NAVAIR 00-80R-19 NATOPS a/c salvage manual (Afloat)
How many MFFV shall be available in each hangar bay to respond to a fire?
1
What is recommended to maximize MFFV firefighting assets initially to the scene?
nursing
In addition to AFFF flush deck zones activated at the scene, a least one ______ shall be activated?
upwind
How often should the crash crew attend team trainer?
Once during a 18 month cycle or whenever the team experiences more than 40% turnover
Most ejection seats used in Navy a/c are fired by what?
Pulling down on the face curtain
What is the first step rescue personnel should take reaching aircraft crewmembers?
Safety the seat
The parachute and survival kit weight is between how many pounds?
30lbs-65lbs
When is the holdback bar installed on a/c with nose gear launch systems?
a/c stopped prior to taxing in to the nose tow deck ramp steering must be disengaged at the entrance to the NGL guide tracks (WYE)
At night how do the pilots signal a brake failure? During the day?
Navigational light will be turned on, during the day he will put his tail hook down
When will the a/c elevators be manned?
General quarters, flight quarters, special sea and anchor detail underway replenishment
What form is used to requisition material that is excluded from MILSTRIP?
DD form 1149
What procedures are used for ordering all material from the Navy Supply System, other military installations the defense logistics Agency, the General Services Admin?
Military standard requisitioning and issue procedures (MILSTRIP)
Command level CDB will see 1st enlistment Sailors within how many days of reporting?
30 days
When shall a CDB be conducted for a sailor who is approaching HYT?
24 months
How long should you retain monthly reports?
12 mohths
What is another term for fundamentals of leadership?
Basic principles of leadership
What type of feedback is given when job performance standards are not being met?
Constructive
What are the 4 types of counseling and advising session's will you be involved with
Personal, career, performance, disciplinary
What info does the record sheet for the tag out log contain?
Record of the numbers of the tags, the person hanging the tags and the persons checking the tag
How often are audits on the tag out system done?
Every week
When working with solvents which of the following actions should you take?
Check the labels on all containers of liquid
What does MOPP stand for?
mission oriented protective posture
Readiness condition III(wartime steaming) is set during what MOPP level?
1
What do you put in the first paragraph of a letter?
State the purpose of the letter
What manual covers naval messages, official letters and endorsements etc?
Dept of the Navy Correspondence manual
When you are at sea where is the ships deck log kept?
With the quartermaster of the watch
How can you prevent rust from building on hand tools?
By applying a light coat of oil, you can prevent rust from building on the tool
What are two types of portable sanders in the navy?
Electrical and pneumatic
What is the purpose of a dynamometer?
The purpose of a dynamometer is to measure energy or force.
What OPNAV instruction outlines the SE licensing procedures?
OPNAVINST 4790.2G.
What signal should be given to prevent a catapult launch?
The SUSPEND signal can be given by any member of the flight deck or catapult crew in order to prevent a launch
Who is responsible for setting the aircraft tiedown configuration requirement
The Aircraft Handling Officer
At a Naval Air Station, what is the area where a particular group of aircraft is typically spotted referred to?
line
What color are the flight deck supervisor's signal wands?
The flight deck supervisor's wands are red and green.
When should an aircraft carrying forward firing ordnance be armed?
A V/STOL aircraft should be armed only after the launch officer's initial walk around and prior to commencing launch operations.
Within the air department's aircraft firefighting organization, what is the Air Bosn responsible for?
The Air Bosn is responsible for organizing, supervising, and training the aircraft crash, salvage, and rescue teams, and for readiness and operation of firefighting equipment.
What person is responsible for assigning personnel to nurse the MFFV?
The background assistance leader
On an LPD, who is responsible for directing all aircraft firefighting efforts?
air officer
What is the maximum capacity of an LHD HICAP station AFFF concentrate tank?
2,000 gallons
Within the crash and salvage team organization, what person is responsible for supervising the installation of aircraft hoisting
equipment?
The Crash and Salvage Leading Petty Officer (LPO
What is the A/S32A-35A?
The A/S32A-35A is the carrier vessel crash crane (CVCC).
How many aircraft fabric-hoisting slings are crash and salvage units required to maintain?
Eight fabric hoisting slings: two 20-footers, two 30-footers, two 40-footers, and two 50-footers.
What is the primary purpose of the rescue team?
Save the lives of the aircrew and passengers.
What NATOPS publication contains specific instructions for releasing personnel from seat restraint devices for each type of aircraft?
NAVAIR 00-80R-14-1 NATOPS
At a shore station, what lifting system should be deployed if entry to a mishap scene is inaccessible to heavy equipment?
An air bag rescue and lifting system should be deployed when entry to a mishap scene is inaccessible to heavy equipment
Tools that are used to pry, ram, cut, and chop are known as what type of tools?
Forcible Entry Tools.
What is the proper method of deploying portable flight line fire extinguisher?
Upwind edge of the fires and directed at the base of the flame in a side-to-side sweeping motion.
Why should each aircraft be grounded with a wire?
So that the static electricity on the aircrafts surface flows off to the ground without causing sparks
What 3M Manual do we use?
OPNAVINST 4790.8C
What does the # sign mean?
Mandatory Related Maintenance
What does an "O" Mean?
Maintenance Check Lost
What does --- Mean?
Denotes Changes or Additions
What does "Y" mean?
Yes, Parts are required
What does "N" stand for?
Parts not Required
What does "X" stand for?
Maintenance Check is Complete
What is on the LOEP? )
(List OF Effective Pages) List of MIP (Maintenance Index Page
What is on the MIP?
(Maintenance Index Page) List of MRC (Maintenance Requirement Card)
3M manual?
OPNAVINST 4790.8C
Safety Manual for Forces Afloat OPNAVINST- 5100.19D
HAZMAT?
HMUG/MSDS
What does SPMIG stand for?
Standard PMS Maintenance Identification Guide
(It is a code on a MRC used to find a suitable replacement for a piece of test equipment).
To who do you report any discrepancy about your maintenance?
Work Center Supervisor (WCS)
How often do the WCS audit the Red Tag Logout?
Daily TAGS Yellow- Caution Red - Danger (Departmental Work Center)
What are the 3 4790/ forms?
4790/2K- Maintenance Attack Form
4790/2l- Supplemental Form
4790/CK- Configuration Change Form
728. Who is the functional manager and responsible for the coordination and direct supervision of all administrative facets of the 3-M system?
3-M Coordinator
729. What are the three scheduling boards utilized for PMS?
Weekly, quarterly, cycle
730. Who is the 3M manager?
Executive Officer
731. Under which of the following circumstances should the work center supervisor be promptly notified?
When there is anything on the MRC that you do not fully understand, When any tools, parts or material listed on the MRC are not available, When any doubt exists about your ability to properly perform the maintenance check
732. What does the acronym I.E.M. stand for?
Inactive equipment maintenance
733. Who reviews the weekly schedule?
Division Officer
734. Where do you look to find your daily PMS assignments?
Weekly PMS board
735. What instruction governs the 3-M system?
OPNAVINST 4790.8C
736. Who screens, serializes, dates and maintains control of all feedback reports?
3-M Coordinator
737. What form is used to document a deferred maintenance action?
4790/2K
738. Submitting a 4790/CK for a newly installed piece of equipment will initiate support to include?
PMS- Technical manuals- Cosal support
739. How is an urgent feedback report sent out?
naval message
740. What action should you take after completing a PMS requirement?
Inform your work center supervisor
741. If a MRC requires a PMS tag out, what document should be attached to the MRC?
Tag guide list
742. Who may authorize danger/caution tags/?
Anyone authorized by the Commanding Officer.
743. While performing maintenance checks, you discover an unsafe procedure on the MRC. After informing your work center supervisor, what should be submitted?
Feedback report
744. When you complete a maintenance requirement, can you "X" it off on the weekly schedule?
No, only the work center supervisor
745. How do you change an incorrect MRC?
Submit a category A feedback report
746. On the weekly boards, what day does the week start on and end on?
Monday to Sunday
747. Using the MRC syscom control number (48 XDST N), what does the 48 mean?
April 1998
748. What color is a technically validated MRC?
YELLOW
749. What color is a Preliminary MRC?
WHITE
750. What color is a Classified MRC?
pink
751. Which PMS check should be conducted at least once every three months?
Q-1